Condition
Used – Prime Condition – Fully Tested & Operational
This commercial timed-access cash controller has been professionally inspected and tested to confirm power-up, electronic control-panel response, timed-access operation, tube-vending functions, indicator operation, drop-chute function, and mechanical operation.
The dark-gray powder-coated steel cabinet shows scratches, scuffs, chipped finish, edge wear, abrasions, dust, residue, and cosmetic marks consistent with previous commercial use.
The control-panel surface and tube-loading area show visible prior-use wear. The lower vault door, lock cylinders, side drop chutes, tube-loading openings, cabinet panels, and operating console appear present.
Keys, cash tubes, tube-measuring dipstick, floor anchors, and internal vault components are not visible in the supplied photos and should be considered not included unless physically present at pickup.
The wooden moving dolly underneath the unit is not included.
Please review all supplied photos for the exact cosmetic condition and included components.
Model Identification
The supplied identification plate confirms:
Brand Displayed on Front: Fidel
Manufacturer Displayed on Plate: Fidel
Commercial Product Identification: Tidel / Fidel TACC IIA
Exact Data-Plate Model: TACC
Product Family: TACC IIA / TACC IIa
Product Type: Timed-Access Cash Controller and Tube-Vending Drop Safe
Serial Number: IA-34937
Manufacturer Code: 03603
Voltage: 100–250V AC
Frequency: 50–60Hz
Maximum Amperage: 0.34A
Required Fuse: MDL-1 Amp
Manufacturer Location Listed on Plate: Carrollton, Texas 75006, USA
The physical identification plate uses the simplified model designation TACC and carries the Fidel name. The unit was supplied and identified commercially as a Tidel TACC IIA, so both names are retained in this listing to prevent confusion.
The manufacturing code is clearly visible as 03603, but a reliable manufacturing date cannot be confirmed from the supplied plate alone.
Description
The Tidel / Fidel TACC IIA is a heavy-duty commercial timed-access cash controller designed to help retail businesses securely manage operating cash, change funds, receipts, checks, and register overages.
The unit combines an electronically controlled tube-vending section with a substantial lower storage vault. Cash or rolled coins can be loaded into compatible tubes and stored in eight vending columns. Authorized employees can then retrieve a selected tube after the required electronic delay.
The delay between requests and cash access helps discourage robbery by limiting the amount of money immediately available to employees. It also allows businesses to keep register change funds secured while still providing controlled access when a cashier requires additional change.
Two side-mounted drop chutes allow register overages, envelopes, checks, receipts, and other compatible deposits to be placed inside the secured lower vault without opening the main vault door.
Tidel describes the TACC product family as a cash-control platform intended to improve retail cash handling and reduce the amount of accessible money at the point of sale. Sesami/Tidel TACC product overview: https://www.sesami.io/products/tacc
This model does not include the advanced screen, bill validator, integrated printer, electronic transaction reporting, or network features found on newer TACC generations.
Tube-Vending Capacity
Number of Tube Columns: 8
Capacity per Column on This Serial-Number Version: 11 Tubes
Total Installed Tube Capacity: Up to 88 Tubes
Compatible Tube Contents: Notes, Cash, or Rolled Coin Depending on Tube Configuration
Vending Method: Electronically Controlled Timed Release
Tube Loading Method: External Top Loading Through Eight Column Openings
Tube-Loading Security: Locking Gate / External Tube-Locking System
The serial number on this unit begins with IA. The TACC-IIA operator’s manual specifies that units with IA-prefix serial numbers hold 11 tubes in each of eight columns, producing a maximum installed capacity of 88 tubes. TACC-IIA operator’s manual: https://www.manualslib.com/manual/1837468/Tidel-Tacc-Iia.html
The 88-tube figure describes the machine’s designed storage capacity. Cash tubes are not visible in the supplied photos and are not included unless physically present at pickup.
Actual cash value depends entirely on the denominations and quantities placed inside the tubes.
Timed-Access Operation
The TACC IIA is designed to delay access to operating cash rather than making the entire change fund immediately available.
The manufacturer’s operating documentation describes:
Standard electronic vend-delay operation
Alternate vend-delay operation for approved peak periods
Separate vending-control functions
Manager-controlled access
Time-delayed vault-opening procedures
Optional courier or armored-car instant-access configuration
Indicator lights showing operating status
Individual access to the eight vending columns
The operator’s manual describes a normal two-minute vend delay and a 30-second alternate delay on compatible configurations. The installed delay settings, key-switch configuration, and programming on this individual unit should be verified before commercial use.
This machine should not be represented as a modern smart safe. It does not visibly include a bill validator, cash recycler, touch screen, fingerprint reader, network connection, transaction printer, or automatic note-counting system.
Deposit Functions
Number of Drop Chutes: Two
Drop-Chute Location: Left and Right Sides of the Upper Cabinet
Drop-Chute Style: Manufacturer-Designed Anti-Fish Manual Chutes
Deposit Destination: Lower Secured Storage Vault
Compatible Deposits May Include:
Register overage cash placed in an appropriate envelope
Checks
Receipts
Deposit envelopes
Cashier paperwork
Shift reports
Compatible sealed deposit packets
Other appropriately sized business documents or cash deposits
The dual-chute configuration allows two operating positions or two deposit categories to use the same secured storage vault.
The TACC-IIA manual describes a lower divider used to separate deposits from the two chute sides. The interior of this unit was not photographed, so the presence and condition of that divider should be verified during inspection.
Do not insert loose objects that may jam the chutes. Cash should be placed in an appropriate envelope or deposit container when required by store policy.
Suitable Applications
Convenience stores
Gas stations
Fuel-service locations
Quick-service restaurants
Fast-food restaurants
Coffee shops
Retail stores
Grocery stores
Pharmacies
Hotel front desks
Entertainment venues
Movie theaters
Casino support areas where locally permitted
Transportation facilities
University retail operations
Hospital gift shops and cafeterias
Corporate cafeterias
Institutional cash offices
High-volume point-of-sale environments
Businesses requiring controlled register-change access
Businesses seeking to reduce immediately accessible cash
Final suitability depends on the buyer’s cash-control procedures, insurance requirements, security plan, local regulations, and compatibility with existing tubes and keys.
Electrical Specifications
Power Type: Electric
Exact Data-Plate Voltage: 100–250V AC
Frequency: 50–60Hz
Maximum Amperage: 0.34 Amps
Required Fuse: MDL-1 Amp
Fuse Type: Manufacturer-Specified 1-Amp Fuse
Phase: Single Phase
Electrical Connection: Grounded AC Supply
The electrical information above comes directly from the plate on this specific unit and takes precedence over specifications for newer TACC IIA revisions.
Current TACC IIA literature commonly lists 120V/60Hz or 220V/50Hz operation. However, this individual unit’s plate specifically states 100–250VAC, 50–60Hz, 0.34A maximum.
Before installation, a qualified technician should inspect the attached electrical connection, verify the correct plug or hardwired configuration, confirm grounding, and check the fuse.
Do not use an ungrounded outlet, damaged extension cord, household plug adapter, or undersized wiring.
Dimensions
Tidel’s published TACC IIA family specifications list:
Width: Approximately 21 in / 533 mm
Depth – Vault Body Only: Approximately 14.5 in / 368 mm
Overall Depth Including Control Console: Approximately 22 in / 559 mm
Height: Approximately 30.75 in / 781 mm
Weight: Approximately 290 lb / 132 kg
The published measurements and weight are from Tidel’s TACC IIA specification sheet. Tidel TACC IIA specification sheet: https://underwoodrse.com/wp-content/uploads/2023/11/TACCIIa-Spec-Sheet.pdf
Production revisions may vary slightly. Buyers with restricted installation space should measure the physical unit before pickup.
The machine is photographed on a wooden moving dolly. The dolly is not part of the safe and is not included in the published dimensions or weight.
Construction
Heavy-duty commercial cash-security cabinet
Manufacturer-published 1/4-inch powder-coated steel plate body and door
Dark-gray powder-coated exterior
Secured lower storage vault
Eight external tube-loading openings
Eight-column internal tube-vending system
Up to 88-tube installed capacity
Electronic time-delay controller
Alternate vend-delay capability
Front-mounted operating console
Indicator-light control interface
External tube-loading locking system
Two manual side drop chutes
Dual anti-fish chute design
Lower vault-access door
Multiple installed key-lock cylinders
Internal floor-anchoring provisions
Heavy commercial security-safe construction
Freestanding floor-mounted design
Approximately 290-pound operating weight
The exact condition of the internal tube magazines, lower divider, door-bolt mechanism, wiring, floor-anchor holes, and internal vault surfaces cannot be determined from the exterior photographs.
Key Features
Electronically controlled timed access to operating cash
Helps reduce immediately accessible register money
Eight tube-vending columns
Up to 88 installed cash or coin tubes
Eleven tubes per column on IA-prefix units
Supports compatible tubes containing notes or rolled coin
Controlled change-fund dispensing
Standard vend-delay operation
Alternate vend-delay capability
External tube-loading access
Tube-loading locking system
Dual side-mounted drop chutes
Anti-fish chute design
Secured lower deposit vault
Separate manager and operating control functions
Heavy-duty powder-coated steel construction
Internal floor-anchoring provisions
Compact footprint relative to its approximately 290-pound weight
Suitable for point-of-sale change-fund replenishment
Useful for receipt, check, envelope, and register-overage deposits
Designed to discourage robbery and reduce internal cash exposure
Designed for continuous commercial retail environments
Universal-voltage input shown on this individual unit
Low maximum electrical current draw
No compressed air, plumbing, drainage, or refrigeration connection required
Cash-Control Benefits
Keeps most operating cash outside the register
Limits immediate employee access to the stored change fund
Introduces a visible delay before cash can be dispensed
Allows controlled replenishment of register change
Provides secure storage for register-overage deposits
Reduces the need to open the lower vault for routine change access
Allows deposits through either side chute
Helps separate daily cash handling from unrestricted vault access
Supports standardized cash-management procedures
May help reduce robbery attractiveness when correctly installed and used
Can reduce the amount of cash exposed at the point of sale
Provides a physical cash-control process without requiring a network connection
Security effectiveness depends on correct installation, floor anchoring, key control, employee training, operating procedures, and the condition of all locks and electronic components.
Security and Safety Features
Electronic time-delayed tube vending
Time-controlled vault-access procedure
Dual anti-fish deposit chutes
External tube-loading lock
Lower vault-door lock cylinders
Manager-controlled operating functions
Optional courier-access compatibility depending on installed configuration
Heavy steel cabinet
Internal floor-anchor provisions
Enclosed electronic components
Replaceable fuse protection
Grounded electrical design
Time delay is a security feature and must not be bypassed, disabled, or improperly modified.
All locks should be inspected and, when appropriate, rekeyed by a qualified safe technician before the unit is placed into service.
Keys are not visible in the supplied photos. Buyers should confirm that all required operating, manager, tube-loading, vault-door, and courier keys are available. Missing keys may require professional replacement or rekeying.
No fire-resistance, waterproof, deposit-safe, UL burglary, or insurance rating should be assumed unless separately verified from markings on the physical cabinet.
Certifications
The identification plate on this unit confirms:
ETL Listed
ETL Listing Number: 36387
Conforms to UL Standard 1950
Certified to CAN/CSA Standard C22.2 No. 950
CE Marked
FCC Part 15 Compliant
The FCC statement indicates that operation is subject to the standard conditions that the device must not cause harmful interference and must accept interference received.
The ETL, UL 1950, CSA C22.2 No. 950, CE, and FCC markings relate primarily to the electrical and electronic equipment. They should not be interpreted as confirmation of a particular burglary-resistance, fire-resistance, or insurance rating for the vault.
Manufacturing Information
Front Brand: Fidel
Plate Manufacturer: Fidel
Commercial Brand / Product Family: Tidel TACC
Supplied Model Identification: TACC IIA
Exact Data-Plate Model: TACC
Product Type: Timed-Access Cash Controller and Deposit Safe
Serial Number: IA-34937
Manufacturer Code: 03603
Maximum Tube Capacity: 88 Tubes
Tube Columns: 8
Tubes per Column: 11 for IA-Prefix Serial Units
Voltage: 100–250V AC
Frequency: 50–60Hz
Maximum Amperage: 0.34A
Fuse: MDL-1 Amp
Manufacturer Location: Carrollton, Texas 75006, USA
Country of Manufacture: Not Explicitly Confirmed on the Supplied Plate
Manufacturing Date: Not Confirmed
Included
One Fidel-branded TACC timed-access cash controller
TACC IIA-style electronic operating console
Eight-column tube-loading section
Installed internal tube-vending mechanism
External tube-loading openings
Tube-loading lock cylinder
Two side-mounted manual drop chutes
Lower storage-vault cabinet
Lower vault door
Installed vault-door lock cylinders
Installed cabinet handles and operating hardware shown
Installed electronic control components
Installed identification and certification labels
All permanently installed components visible in the supplied photos
Unit sold exactly as pictured
Not Included
Wooden moving dolly shown underneath the safe
Cash
Coins
Rolled coin
Cash tubes
Spare cash tubes
Tube-measuring dipstick
Keys are not shown
Replacement keys
Manager key
Vending key
Door-bolt key
Tube-loading key
Courier or armored-car key
Floor anchors or installation bolts
Surge protector
External printer
Receipt printer
Bill validator
Cash recycler
Note counter
Coin counter
POS terminal
Network hardware
Computer
Touch screen
Fingerprint reader
Remote monitoring service
Alarm system
Installation service
Freight handling equipment
Safe-moving service
Operator manual
Service manual
Replacement fuse
Additional accessories not shown in the supplied photos
Installation Requirements
Installation should be completed by a qualified commercial safe installer, locksmith, or cash-security equipment technician.
The unit weighs approximately 290 pounds and requires suitable material-handling equipment. Do not attempt to lift or move it manually without trained assistance.
Move the unit using safe-rated equipment such as a properly rated appliance dolly, safe dolly, pallet jack, or other professional moving equipment.
Install on a level, structurally sound floor.
Verify that the floor can safely support the unit’s concentrated weight.
Anchor the cabinet through the manufacturer-provided internal floor-anchor points.
Use anchoring hardware appropriate for the specific concrete or structural floor.
Do not operate the safe while it remains unsecured on a moving dolly.
Provide a properly grounded electrical supply compatible with the unit’s 100–250VAC and 50–60Hz plate rating.
Keep the unit indoors in a dry, climate-controlled location.
Do not install where water, cleaning spray, grease, steam, or cooking heat can enter the control console.
Allow sufficient front clearance for vault-door opening.
Allow sufficient side clearance to use both deposit chutes.
Allow sufficient upper clearance for tube loading and servicing.
Control all keys according to the buyer’s written cash-management policy.
Have a qualified technician verify the installed vend delays, vault-opening delay, lock operation, and electronic controls before loading cash.
Cleaning & Care
Disconnect electrical power before cleaning or servicing.
Do not spray the machine with a hose or pressure washer.
Do not pour liquid into the control panel, tube openings, drop chutes, locks, fuse holder, or electrical cabinet.
Clean painted exterior surfaces with a soft damp cloth and mild non-abrasive cleaner.
Dry all surfaces immediately after cleaning.
Do not use corrosive chemicals, steel wool, or abrasive pads on the powder-coated finish.
Keep the tube-loading openings clear of dirt and foreign objects.
Keep drop chutes clear and inspect them regularly for obstructions.
Inspect locks, hinges, handles, door bolts, and anchoring points regularly.
Use only compatible tubes in good condition.
Do not insert damaged, deformed, overfilled, taped, or incorrectly sized tubes.
Use a qualified safe technician for lock, delay, vending, fuse, wiring, or vault-door service.
Important Notes
Sold as-is, where-is
Fully tested and operational prior to listing
Used commercial cash-security equipment
Exterior shows scratches, scuffs, chipped finish, abrasions, edge wear, dust, and residue
Front badge displays Fidel
Data plate displays Fidel
Supplied commercial model identification is Tidel TACC IIA
Exact data-plate model is TACC
Serial number is IA-34937
Manufacturer code is 03603
Manufacturing date is not confirmed
IA-prefix serial configuration holds eleven tubes per column
Eight tube columns provide up to 88 installed tubes
Cash tubes are not shown and should be considered not included
Tube-measuring dipstick is not shown
Keys are not shown
All required keys must be verified before purchase
Missing keys may require professional replacement or rekeying
Interior vault condition was not photographed
Internal tube magazines were not photographed
Internal deposit divider was not photographed
Floor-anchor hardware is not shown
Wooden moving dolly is not included
Exact plate input is 100–250VAC
Exact plate frequency is 50–60Hz
Maximum plate amperage is 0.34A
Manufacturer specifies an MDL-1 amp fuse
Use a properly grounded electrical supply
Electrical connection should be inspected before installation
Unit weighs approximately 290 pounds
Professional moving equipment is required
Do not move the unit by pulling on the control panel, drop chutes, tube openings, or vault-door handle
Unit must be securely floor anchored before cash is loaded
Verify all electronic delays before commercial use
Verify every lock and key-control position before commercial use
Do not bypass the time-delay system
Do not place loose or oversized objects in the drop chutes
Do not load damaged or incompatible tubes
This model does not visibly include a bill validator
This model does not visibly include a transaction printer
This model does not visibly include a cash recycler
This model does not visibly include a touch screen
This model should not be represented as a network-connected smart safe
No manufacturer warranty included
Shipping calculated at checkout
Freight or local pickup recommended due to weight
Local pickup available
https://oasis-restaurant-equipment.myshopify.com/products/prime-condition-tidel-fidel-tacc-iia-88-tube-timed-access-cash-controller-dual-drop-security-safe-100250v-fully-tested-operational
