Condition
Used – Superior Condition – Fully Tested & Operational
This commercial frozen-beverage machine has been professionally inspected and tested to confirm refrigeration, freezing, mixing-auger, dispensing-handle, and mechanical operation.
The stainless steel exterior shows scratches, scuffs, water spots, fingerprints, surface marks, and normal cosmetic wear consistent with previous commercial use. The three clear bowls show light clouding, residue, scratches, and prior-use marks.
All three dispensing handles, faucets, bowls, lids, internal mixing augers, drive components, and support feet appear present in the supplied photos.
Three removable flavor labels—Fruit Punch, Bubble Gum, and Strawberry—are attached to the front. These labels can be removed or replaced by the buyer.
The three removable drip trays are not shown and should be considered not included unless physically present at pickup.
Please review all supplied photos for the unit’s exact cosmetic condition.
Model Identification
The supplied manufacturer identification plate confirms:
Brand: Crathco
Original Manufacturer: S.P.M. Drink Systems S.p.A.
Exact Data-Plate Model: FROSTY DREAM 3
Provided Product Number: 1206-011
Machine Identification Number: 01.CFD03B/115002420
Voltage: 115V AC
Frequency: 60Hz
Phase: Single Phase
Amperage: 13.2A
Refrigerant: R448A
Refrigerant Charge: 13.3 oz
Manufacturing Date: May 31, 2021
Country of Manufacture: Italy
The physical data plate uses the model name FROSTY DREAM 3, while this machine is commonly listed under the simplified Crathco Frosty 3 product-family name.
Description
The Crathco Frosty Dream 3 is a commercial countertop frozen-beverage dispenser designed to produce, mix, display, and dispense three flavors simultaneously.
Each transparent bowl holds approximately 3.2 gallons / 12 liters, providing a combined maximum capacity of approximately 9.6 gallons / 36 liters.
The three bowls operate independently, allowing an operator to prepare different compatible products or flavors at the same time. Suitable applications include granitas, slushies, frozen lemonades, fruit drinks, frozen coffees, frozen mocktails, sherbets, and other approved frozen-beverage mixtures.
This is a manual pourover machine. Prepared product mixture is poured directly into each bowl rather than supplied through an automatic-fill system.
Crathco’s double-mixing design helps continuously circulate the product and reduce ice accumulation, supporting smoother and more consistent finished beverages. Mechanical controls allow independent operation of each bowl and provide normal production and night-mode functions.
The transparent bowls keep the product visible to customers, making the machine suitable for convenience stores, cafés, restaurants, concession stands, hotels, entertainment venues, cafeterias, dessert shops, and high-volume beverage stations.
Crathco’s official Frosty 3 specifications confirm the three independent 3.2-gallon bowls, 9.6-gallon total capacity, mechanical controls, double-mixing system, and 115V electrical configuration. Official Crathco Frosty 3 product specifications: https://www.crathco.drink-systems.com/us-en/slush-and-frozen-beverage-dispensers/frosty-3-slush-dispenser-2-non-insulated-3.2-g-560517/
Capacity Specifications
Number of Bowls: Three
Capacity per Bowl: Approximately 3.2 Gallons / 12 Liters
Total Maximum Capacity: Approximately 9.6 Gallons / 36 Liters
Bowl Configuration: Three Independent Transparent Bowls
Filling Method: Manual Pourover
Dispensing Points: Three
Product Visibility: Clear Display Bowls
Control Type: Mechanical
Mixing System: Double Mixing System
Operating Modes: Production Mode and Night Mode
Cooling System: Air-Cooled
Installation Type: Countertop
Actual usable capacity may vary based on the product’s expansion, sugar concentration, recipe, and required headspace.
Suitable Applications
Granita
Slush beverages
Frozen lemonade
Fruit-flavored frozen drinks
Frozen tea
Frozen coffee beverages
Frozen cappuccino mixes
Smoothie-style beverages using approved recipes
Frozen mocktails
Sherbet-style frozen products
Non-carbonated frozen beverages
Compatible milkshake-style mixtures
Compatible cold-drink mixtures
Other manufacturer-approved frozen specialties
Product performance depends on the recipe, ambient temperature, starting liquid temperature, sugar concentration, selected consistency, and cleaning condition of the refrigeration and mixing systems.
Product Requirements
Frozen-beverage mixtures require the correct soluble-solids or sugar concentration to freeze and circulate properly.
Mixtures with insufficient sugar may freeze solid and overload the auger or drive system.
Overly concentrated mixtures may remain too soft or fail to reach the intended consistency.
Only products approved for commercial granita or frozen-beverage machines should be used.
Do not place carbonated beverages, solid ice cubes, fruit pits, large fruit pieces, utensils, or foreign objects inside the bowls.
Electrical Specifications
Voltage: 115V AC
Phase: Single Phase
Frequency: 60Hz
Amperage: 13.2 Amps
Manufacturer-Published Maximum Electrical Power: Approximately 1.2kW
Manufacturer-Published Plug Configuration: NEMA 5-20P
Required Receptacle: Compatible Grounded NEMA 5-20R Commercial Receptacle
Power Type: Electric
The exact 115V, 60Hz, single-phase, 13.2A specifications are confirmed directly by this unit’s manufacturer plate.
The current official Frosty 3 documentation publishes the same 115V, single-phase, 60Hz, 13.2A electrical configuration and a NEMA 5-20P plug. The physical plug should still be inspected before installation because production revisions or previous service work may differ. Crathco electrical specifications: https://www.crathco.drink-systems.com/us-en/slush-and-frozen-beverage-dispensers/frosty-3-slush-dispenser-2-non-insulated-3.2-g-560517/
Use a dedicated properly grounded commercial circuit. Do not use a household adapter or undersized extension cord.
Refrigeration Specifications
Cooling Method: Air-Cooled
Refrigerant on This Unit: R448A
Refrigerant Charge: 13.3 oz
Published Ambient Working Range on Plate: Approximately 22–36°C / 72–97°F
High-Pressure Control Test: 2500 kPa
Low-Pressure Control Test: 1000 kPa
The R448A refrigerant and 13.3-ounce charge are confirmed by the data plate on this specific machine.
Current Frosty 3 models may use a different refrigerant, including R449A or R290. Refrigerant information from newer versions should not replace the specifications on this individual unit.
Refrigeration service must be performed by a qualified technician using procedures and equipment appropriate for R448A.
Dimensions
Crathco’s official Frosty 3 family specifications publish:
Width: Approximately 23.625 in / 23 5/8 in
Depth: Approximately 21.875 in / 21 7/8 in
Height: Approximately 32.5 in / 32 1/2 in
Published Net Weight: Approximately 156.5 lb / 71 kg
Total Bowl Capacity: Approximately 9.6 Gallons / 36 Liters
These dimensions are based on the manufacturer’s Frosty 3 product-family specifications. Production revisions may vary slightly, so buyers with restricted counter space should verify the physical unit before pickup.
Installation Requirements
Place the machine on a level, stable, moisture-resistant commercial counter.
The supporting surface must safely hold the machine’s approximately 157-pound empty weight plus up to approximately 80 pounds of liquid product.
Provide adequate clearance around the ventilation openings.
Do not install beside an oven, fryer, range, radiator, or other high-heat appliance.
Do not operate in direct sunlight or in an excessively hot environment.
Keep the condenser and ventilation openings free from dust, grease, boxes, cups, and other obstructions.
Provide a compatible grounded 115V electrical receptacle.
Allow sufficient front clearance for dispensing and sufficient upper clearance to remove the bowl lids.
No automatic water or product-supply connection is shown or required for normal manual-pourover operation.
Construction
Stainless steel commercial exterior
Three clear removable product bowls
Three approximately 3.2-gallon bowls
Three independent freezing and mixing positions
Three dispensing faucets
Three black dispensing handles
Internal white mixing augers
Exposed white and black bowl-drive components
Double-mixing product-circulation system
Mechanical operating controls
Production-mode configuration
Night-mode configuration
Air-cooled refrigeration system
Removable bowl lids
Removable dispensing components
Commercial electrical power cord
Black countertop support feet
Compact countertop configuration
Italian-manufactured commercial beverage platform
Key Features
Three-flavor frozen-beverage operation
Approximately 9.6-gallon total capacity
Three independent 3.2-gallon bowls
Independent bowl operation
Manual pourover filling
Three separate dispensing stations
Double-mixing system
Helps reduce ice accumulation
Supports consistent product circulation
Transparent bowls display product and flavor colors
Mechanical controls
Production and night operating modes
Air-cooled refrigeration
Stainless steel exterior
Removable bowls and dispensing components
Compact countertop footprint
115V commercial electrical configuration
NEMA 5-20P manufacturer-published plug configuration
Suitable for granita and slushy beverages
Suitable for frozen lemonade and fruit drinks
Suitable for compatible frozen coffee products
Suitable for approved frozen mocktails and sherbets
Useful for convenience stores and concession stands
Useful for cafés, hotels, restaurants, and entertainment venues
Safety Features
Safety Stop System: Manufacturer-Designed Safety System
Bowl Covers: Three lids shown
Stable Support: Black countertop feet
Electrical Listing: ETL Listed
Sanitation Listing: ETL Sanitation Listed
Enclosed Refrigeration Compartment: Stainless steel cabinet
Safety systems must be checked before commercial use. Never bypass safety switches or operate the machine with improperly installed bowls, lids, augers, or dispensing components.
Certifications
The certification label visible on this machine confirms:
ETL Listed
ETL Sanitation Listed
Conforms to ANSI/UL Standard 621
Conforms to ANSI/NSF Standard 6
Certified to a CAN/CSA C22.2 Standard
The final CAN/CSA standard number is partially obscured in the supplied photograph and should be verified directly from the physical certification label if required by the local authority.
Manufacturing Information
Brand: Crathco
Manufacturer: S.P.M. Drink Systems S.p.A.
Exact Plate Model: FROSTY DREAM 3
Provided Product Number: 1206-011
Product Family: Frosty 3
Product Type: Triple-Bowl Pourover Granita and Frozen-Beverage Machine
Machine Identification Number: 01.CFD03B/115002420
Manufacturing Date: May 31, 2021
Manufacturer Location: Spilamberto, Modena, Italy
Country of Manufacture: Italy
Refrigerant: R448A
Refrigerant Charge: 13.3 oz
Included
One Crathco Frosty Dream 3 frozen-beverage machine
Three approximately 3.2-gallon clear bowls
Three clear bowl lids
Three installed mixing-auger assemblies
Three installed dispensing-faucet assemblies
Three black dispensing handles
Three installed bowl-drive systems
Attached electrical power cord
Black countertop support feet
Fruit Punch flavor label
Bubble Gum flavor label
Strawberry flavor label
All installed components visible in the supplied photos
Unit sold exactly as pictured
Not Included
Removable drip trays are not shown
Replacement drip-tray grates
Automatic-fill lid system
External product-supply system
Cups
Cup dispensers
Straws
Spoons
Slushy syrup or beverage concentrate
Prepared frozen-beverage mixture
Cleaning chemicals
Lubricant
Replacement seals or O-rings
Spare dispensing valves
Spare augers
Replacement bowls
Locks or lid keys
Equipment stand or counter
Operator manual
Additional accessories not shown in the supplied photos
Cleaning & Care
Disconnect the machine from electrical power before disassembly or cleaning.
Drain all product from each bowl before removing dispensing components.
Remove and clean the bowls, lids, augers, faucet components, seals, and other food-contact parts according to manufacturer instructions.
Use only food-safe cleaners and sanitizers suitable for commercial beverage equipment.
Do not use abrasive pads that may damage the clear bowls or stainless steel.
Do not wash the motorized base with a hose or pressure washer.
Do not immerse the machine base, power cord, plug, or electrical controls in water.
Do not allow cleaning liquid to enter the ventilation openings.
Inspect all O-rings, seals, dispensing components, and drive parts during cleaning.
Lubricate only the components specified by the manufacturer using approved food-grade lubricant.
Clean the air-cooled condenser regularly.
Allow all parts to dry before reassembly.
Sanitize all food-contact components before returning the machine to service.
Important Notes
Sold as-is, where-is
Fully tested and operational prior to listing
Used commercial equipment with cosmetic wear
Stainless steel surfaces show scratches, scuffs, fingerprints, and water spots
Clear bowls show clouding, scratches, residue, and prior-use marks
Flavor labels are attached to the front
Removable drip trays are not shown and should be considered not included
Exact data-plate model is FROSTY DREAM 3
Provided product number is 1206-011
Manufactured May 31, 2021
Made in Italy
Requires 115V, single-phase, 60Hz electrical service
Data plate specifies 13.2 amps
Manufacturer publishes a NEMA 5-20P plug configuration
Verify the physical plug and receptacle before installation
Use only a properly grounded commercial circuit
Do not use a household plug adapter
Do not use an undersized extension cord
Machine is heavy and requires qualified assistance for lifting
Do not lift the machine by the bowls, lids, faucets, or dispensing handles
Install only on a level counter capable of supporting the total operating weight
Maintain proper air circulation around the machine
Do not block ventilation openings
Do not install near high-heat cooking equipment
Refrigerant on this exact unit is R448A
Refrigerant charge is 13.3 oz
Refrigeration service must be completed by a qualified technician
Use only compatible commercial frozen-beverage mixtures
Verify proper product sugar concentration before freezing
Do not add ice cubes or solid objects to the bowls
Do not operate with empty bowls in production mode
Do not operate without correctly installed augers, bowls, lids, and dispensing assemblies
Never place hands or utensils inside an operating bowl
Disconnect power before cleaning or servicing
Clean and sanitize all food-contact parts before first use
Inspect seals and O-rings for wear or leakage
No manufacturer warranty included
Shipping calculated at checkout
Local pickup available
https://oasis-restaurant-equipment.myshopify.com/products/superior-condition-crathco-frosty-dream-3-1206-011-triple-3-2-gallon-pourover-granita-slushy-frozen-beverage-machine-115v-fully-tested-operational
