> Important product correction: The pictured item is a Carlisle Cateraide commercial insulated food pan carrier, not a Gino Rossi RR45 coffee grinder. Based on the brown color, front-loading design, size, and five-pan cabinet style, it matches the Carlisle PC300N01 configuration. The supplied grinder price of $1,256 does not apply to this item.
Condition
Used – Good Condition – Fully Inspected & Ready for Commercial Use
This Carlisle insulated food carrier has been professionally inspected for structural integrity, door movement, hinges, carrying handles, cabinet condition, and general usability.
The molded polyethylene exterior shows visible scratches, scuffs, discoloration, surface wear, and cosmetic marks consistent with previous catering or commercial foodservice use. A small damaged or recessed area is visible near the top surface, as shown in the supplied close-up photo.
The exact condition of the interior pan tracks, gasket, latch, and removable components should be confirmed from additional interior photos or during pickup. Cosmetic wear does not prevent the unit from being used for insulated food transportation when the door and seal are functioning correctly.
Please review all photos carefully for the exact physical condition.
Description
The Carlisle PC300N01 Cateraide™ is a commercial insulated front-loading food pan carrier designed to transport hot or cold prepared food between kitchens, catering venues, banquet halls, hotels, event spaces, schools, hospitals, and off-site foodservice locations.
This passive carrier holds up to five full-size 2½-inch-deep food pans, with individual molded tracks that help keep each pan stable and separated during loading, unloading, and transportation. It may also accommodate different combinations of 2½-inch, 4-inch, and 6-inch-deep food pans, depending on the arrangement.
Commercial foam insulation helps maintain food temperature for extended transport without requiring electricity. Carlisle states that Cateraide insulated carriers can keep food hot or cold for up to approximately six hours, although actual holding time varies according to starting food temperature, ambient conditions, door openings, pan type, and how fully the cabinet is loaded.
The front door opens wide for convenient pan access, while molded handles on the front and rear support easier lifting and carrying. The cabinet is also stackable, allowing multiple carriers to be stored or transported efficiently.
Capacity
Maximum Standard Capacity: 5 Full-Size Food Pans Standard Pan Configuration: Five 2½-Inch-Deep Full-Size Pans Alternative Capacity: Multiple combinations of 2½-Inch, 4-Inch, and 6-Inch-Deep Food Pans Loading Style: Front Loading / End Loading Compartment Type: Passive Insulated Temperature Function: Hot or Cold Holding
Carlisle identifies the PC300N series as a five-pan insulated front-loading carrier with individual tracks for each food pan.
Temperature-Holding Performance
Approximate Holding Time: Up to 6 Hours Maximum Heat Resistance: Approximately 200°F Cooling Method: Passive Insulation Heating Element: Not Included Electrical Connection: Not Required
The carrier should be preheated or prechilled according to the manufacturer’s recommendations for best performance. Food should be loaded at safe serving temperatures and monitored according to applicable food-safety regulations.
Actual temperature retention depends on:
Starting food temperature
Ambient temperature
Number of pans loaded
Frequency of door opening
Condition of the gasket and door
Pan material and lid type
Length of transportation
Use of compatible hot or cold packs
Dimensions
Exterior Width: 17 in Exterior Depth / Length: 24.25 in Exterior Height: 25.25 in
Interior Width: Approximately 13.75 in Interior Depth: Approximately 20.75 in Interior Height: Approximately 17 in
Approximate Weight: 37–38.55 lb.
These dimensions correspond to Carlisle’s PC300N five-pan carrier configuration.
Power Requirements
Power Type: Non-Powered Voltage: Not Applicable Phase: Not Applicable Amperage: Not Applicable
This insulated carrier uses commercial foam insulation and does not require electricity, gas, refrigeration, water, or drainage connections.
Construction
Heavy-duty molded polyethylene exterior
Commercial foam insulation
Front-loading cabinet design
Individual molded food-pan tracks
Molded carrying handles
Hinged front-access door
Removable door gasket on applicable configuration
Automatic self-venting design
Stackable cabinet construction
Stain-resistant molded surface
Scratch-resistant commercial body
Heat-resistant construction
Passive hot and cold holding system
Made for repeated commercial transportation
Key Features
Holds up to five full-size food pans
Individual tracks support each food pan
Helps maintain hot or cold food temperatures
Passive design requires no electricity
Commercial foam insulation
Approximately six-hour maximum holding capability
Front-loading design allows easy pan access
Door opens wide for loading and unloading
Molded handles at the front and rear
Stackable for more efficient storage and transport
Automatic self-venting system helps control excess steam
Durable polyethylene resists stains and everyday impacts
Suitable for full-size commercial food pans
Compact enough for catering vans and service areas
NSF-listed commercial foodservice design
Made in the USA
Carlisle describes the PC300N01 as insulated, stain- and scratch-resistant, heat-resistant to 200°F, self-venting, stackable, and manufactured from polyethylene.
Recommended Applications
Suitable Food Applications
Food should be placed in properly covered commercial pans before transportation.
Certification
The NSF mark is molded into the pictured carrier, and Carlisle identifies the PC300N01 as an NSF-listed food pan carrier.
Certification applies to the product as manufactured. Continued sanitary use depends on proper cleaning, intact surfaces, compatible food pans, and correct food-handling procedures.
Manufacturing Information
Manufacturer: Carlisle FoodService Products Brand: Carlisle Product Line: Cateraide™ Probable Model: PC300N01 Equipment Type: Commercial Insulated Front-Loading Food Pan Carrier Color: Brown Capacity: 5 Full-Size Food Pans Material: Molded Polyethylene with Foam Insulation Country of Manufacture: USA Visible Molded Marking: Carlisle, OKC, Made in USA Visible NSF Mark: Yes
The exact manufacturer model number is not visibly molded into the supplied close-up. The PC300N01 designation is based on the pictured brown color and matching five-pan Cateraide design.
Included
One Carlisle insulated front-loading food pan carrier
Hinged front door
Molded carrying handles
Internal food-pan tracks, if present as manufactured
Installed hardware and components shown in the supplied photos
The carrier is sold exactly as shown in the photos.
Food pans, pan lids, hot packs, cold packs, dollies, straps, carts, utensils, and food products are not included unless specifically confirmed.
Important Notes
