Make: Hoshizaki America, Inc. Model: HS-2142 Width: 52.0 Depth: 1.5 Height: 16.5
Division: Southern California
🔹 Condition
New / Open Box – Prime Condition – Genuine OEM Replacement Part
This Hoshizaki HS-2142 replacement bin door is offered in new/open-box condition. The Parts Town packing list and exterior carton label both identify the enclosed part as:
Hoshizaki HS-2142 – B-900 Bin Door Replacement
The outer cardboard carton shows visible punctures, dents, tape, scuffs, label wear, and cosmetic damage caused by shipping and warehouse storage. These marks affect the packaging and do not necessarily indicate damage to the replacement door inside.
Before shipment or publication, the carton should be opened carefully to confirm:
The complete replacement door is present
The door is not cracked, bent, or warped
Both bushings are included
Installation hardware is present
The black exterior surface has no shipping damage
The correct HS-2142 part number is molded, labeled, or documented inside
The part should remain protected in its original packaging until installation.
🔹 Description
The Hoshizaki HS-2142 is a genuine OEM replacement bin door designed for compatible Hoshizaki B-900-series commercial ice storage bins.
This door provides access to the stored ice while helping shield the bin interior from warm ambient air, dust, debris, accidental contact, and other external contaminants. Replacing a cracked, warped, damaged, or missing door helps restore proper access and improves the storage bin’s ability to protect the ice supply.
Hoshizaki’s official parts documentation identifies the HS-2142 as the correct bin-door assembly for the B-900PF and B-900SF storage-bin families. The official parts list also states that the door assembly includes the required door bushings.
This is a replacement component only. It is not a complete ice bin or ice-making machine.
🔹 Product Identification
Manufacturer: Hoshizaki Manufacturer Part Number: HS-2142 Parts Town Number: HOSHS-2142 Product Type: Ice Storage Bin Door Replacement Kit Compatible Equipment Family: Hoshizaki B-900 Commercial Ice Bins Color: Black Installation Position: Front Bin Access Opening Condition: New / Open Box Quantity: 1 Door Assembly
The packing paperwork confirms a quantity of one Hoshizaki HS-2142 replacement door.
🔹 Compatibility
The HS-2142 replacement door is specifically associated with:
Parts Town identifies the HS-2142 as a genuine OEM replacement kit for B-900 units, including popular B-900PF and B-900SF configurations.
Important Compatibility Warning
Do not purchase this part based only on the width or appearance of the existing door.
Before ordering, verify:
Full storage-bin model number
Storage-bin serial number
Existing door dimensions
Hinge and bushing locations
Equipment production revision
HS-2142 compatibility in the applicable parts manual
This part is not automatically interchangeable with doors for Hoshizaki B-700, B-800, B-500, or B-300 bins. Those equipment families use different replacement-door part numbers.
🔹 Dimensions
Width: 52 in Depth / Thickness: 1.5 in Height: 16.5 in
Current exact-part specifications list the HS-2142 assembly at 52 inches from left to right, 1½ inches front to back, and 16½ inches high.
Metric Approximation
Width: 132.08 cm Depth: 3.81 cm Height: 41.91 cm
Measurements should be verified against the original bin opening before installation.
🔹 Construction
Durable molded commercial bin-door construction
Black exterior finish
Wide horizontal access-door format
Integrated upper pivot edge
Designed for repeated commercial opening and closing
Smooth surface for routine cleaning
OEM geometry for compatible B-900 bins
Replacement bushings included according to the official parts list
Installation hardware included according to current exact-part listings
The exact-part listing describes the assembly as including installation hardware for replacing a cracked or broken B-900 bin door.
🔹 Key Features
Genuine Hoshizaki OEM replacement component
Designed specifically for B-900 ice storage bins
Restores front access to stored ice
Helps limit exposure to warm ambient air
Helps protect stored ice from foreign objects
Approximately 52-inch-wide commercial door
Direct replacement configuration
Includes required bushings according to Hoshizaki documentation
Installation hardware included
Durable commercial construction
No electrical connection required
No refrigeration service required
New/open-box condition
Parts Town notes that the HS-2142 provides access to the storage area while helping protect fresh ice from warm temperatures and foreign objects.
🔹 Why Replace a Damaged Bin Door?
A damaged or missing ice-bin door may cause:
Increased exposure of stored ice to room air
Easier entry of dust and debris
Reduced protection from accidental contact
Difficulty accessing the ice supply
Poor door movement
Unsafe sharp edges around cracks
Door misalignment
Increased sanitation concerns
Premature wear of hinges and bushings
Installing the correct replacement door helps return the storage bin to its intended access and protection configuration.
🔹 Installation Information
Installation should be completed only after confirming the exact storage-bin model and serial number.
General Installation Process
1. Empty or protect the ice inside the storage bin. 2. Disconnect or safely shut down the associated ice-making equipment when necessary. 3. Clean and sanitize the work area. 4. Support the existing door before removing hardware. 5. Remove the damaged door and old bushings. 6. Inspect the hinge and frame areas for damage. 7. Install the supplied bushings and compatible hardware. 8. Position the HS-2142 replacement door. 9. Confirm smooth opening and closing. 10. Check that the door remains properly aligned. 11. Clean and sanitize the new door before returning the bin to service.
Installation procedures may vary by production revision. Follow the correct Hoshizaki service documentation for the individual bin.
🔹 Included Components
According to Hoshizaki’s official parts list, the HS-2142 bin door includes:
Hoshizaki lists the bushings as item number 2 under the HS-2142 door assembly.
Current exact-part retail documentation also states that installation hardware is included.
Included in This Sale
Hoshizaki HS-2142 door replacement kit
Original shipping carton
Parts Town packing documentation
Factory-packed components physically present inside the carton
The item is sold exactly as contained in the photographed package.
🔹 Not Included
🔹 Cleaning and Sanitation
Before installation:
Inspect the door for shipping debris
Wash using an approved foodservice cleaner
Rinse thoroughly
Sanitize with a food-contact-approved solution
Allow the surface to air dry
Clean the bin opening and hinge area
Replace contaminated or damaged installation hardware
Avoid harsh abrasives that may scratch the surface
Because this door provides access to stored ice, sanitation procedures should follow local health-code and manufacturer requirements.
🔹 Maintenance Recommendations
After installation:
Clean and sanitize the door regularly
Inspect the pivot and bushing areas
Check for cracks or deformation
Confirm smooth operation
Avoid placing heavy objects on the door
Do not force the door when obstructed
Keep the hinge area free of ice buildup
Replace worn bushings when necessary
Confirm that the door remains aligned with the bin opening
🔹 Power Requirements
Power Type: Non-Powered Replacement Part Voltage: Not Applicable Phase: Not Applicable Frequency: Not Applicable Amperage: Not Applicable Wattage: Not Applicable Refrigerant: Not Applicable
This component has no electrical, plumbing, gas, or refrigeration connection.
🔹 Manufacturing Information
Manufacturer: Hoshizaki America, Inc. Brand: Hoshizaki Part Number: HS-2142 Parts Town Number: HOSHS-2142 Equipment Type: Commercial Ice Storage Bin Replacement Door Compatible Bin Family: B-900 Compatible Primary Models: B-900PF, B-900SF Quantity: One Door Kit Country of Manufacture: Not Confirmed on the Visible Carton Original Order Date Shown: June 19, 2019 Original Ship Date Shown: June 21, 2019
The order and shipment dates appear on the Parts Town packing list and describe the original shipment, not the manufacturing date of the part.
🔹 Important Notes
